Server

Upgrade Guide > Upgrade Instructions > F. ICE OS Configuration Wizard > Server

Server

1. Verify the configurations on the screen are correct

2. In Patch Server, select from the following options:

Reverse Proxy Access:

Enable only if you have configured reverse proxy in the environment.

Enable Crash Reporting:

Select to enable crash reporting (off by default).

Install ICE Desktop for Web:

Enable this option if you are going access ICE Desktop application over a web browser

ICE Desk Phone Support:

Enable this option if you are going to run ICE XML service over Cisco IP Phone for enabling Push to talk over IP Phone devices.

Rallypoint:

Rallypoint TLS port: Default port is set to 7443. The port can be changed if needed.

Rallypoint Web Socket Port: Default port is set to 8443. Do not change.

Patch Server

Install Patch Server:
Disable if not using the Patch Server feature. If selected, a Patch Server will be installed on this host. This component requires a license.

Install Archiver Server:
Keep the values default.

Install Static Reflector:
Keep the values default.

Install Swagger (Open API):
Enable if required

Enable Minio Console:
Keep the default value

3. Click Apply to proceed.

4. GEOREDUNDANCY:
Perform the same steps for the DC1 and then DC2 screens.

For DC2 only, perform the following:

Install Archive Server (DC2):
If you are using Archiver Server, enable this option on the DC2 server. Support for this feature has been added in 3.6.0.